Used to secure flying wires or hemp lines to flying bars so that the lines cannot slide along the bar. Theycan also be used inverted as a fixing point on flying bars for small pulleys etc.
Our hanging clamps have all the sharp corners removed so they are less likely to catch on cloths and gauzes and the smart black appearance makes front of house rigs less unsightly. When touring, lines can be quickly refixed in the same place without needing unsightly tape marks.
If flying heavy loads always use the hanging clamp with a certified shackle.
WLL with shackle pin in slot: 550 kg. WLL with shackle body in slot: 50 kg.
The SWL may be affected by the rating of the shackle. This larger sized Hanging Clamp fits bars from 60.3 mm OD gas barrel. The top hole is now slotted so shackles can be used inverted but with a reduced WLL. The slot for the shackle is 13.5 mm wide and 30.5 mm long. They are designed to be used with 1.5t Crosby or Green Pin Bow Shackles.
Size: 180x40x65 mm.
The finish is black powder coated.
Fixings supplied: 2 off M10x40 HT bolts with Nyloks and washers [max torque 3.5 Nm].
For diverting flying wires along the bar see bar divertors.
Weighs 672 g.
The direction of pull should be either in-line or diverted along the bar. If the bar does not rotate to the direction of the pull then the WLL would reduce to 47 kg. Supplied instructions must be adhered to, including bolt tightening torques.
Associated Documents
| Quantity | Price ex VAT |
| 0—49 | £8.95 each |
| 50+ | £8.05 each |
Get notified about changes to this product
including pricing updates and stock availability
by using Visual Ping: