Product Detail

This material is used in similar situations to Silicone Rubber. It provides a lower cost, but less durable option. 

Remeltable PVC can be poured over a master to form a flexible mould.

Good tensile strength and flexibility will allow castings with deep undercuts to be removed from a one-piece mould, without damage. The material does not require a release agent and when the mould is worn, the product can be remelted [at 130 – 135°C] and used again — a fully recyclable product!

We offer the product in two grades, Flexible [Beige] and Semi-Flexible [Blue]. 

Choose the Semi-Flexible for large moulds and the Flexible for more detail. The melting pot gives a thermostatically controlled temperature range of between 50°C and 200°C and will prevent scorching. 

Be aware that the product will not reach sufficient heat to melt on a water jacket double boiler. Jesmonite do not recommend using this mould-material for casting their products, but instead recommend using a high grade silicone mouldmaking compound.