Product Detail

All new for 2023, Froth Pak is now HFC-free, which means that it does not contain ozone-depleting chemicals. Slightly more white in colour than previous version and also more temperature sensitive, the tank contents must be at a minimum of 24°C . Do not use product if under this temperature as it will result in improper mixing of the chemicals and much disappointment!

Froth-Pak is a two part spray applied polyurethane foam system.

Being spray applied, the foam can be used where pouring foam would be uncontrollable. Flints are distributors of this excellent product and offer it at very competitive prices.

Froth-Pak is perfect as a sculpting medium for carving.

Use it to quickly to create rock faces or spray it onto tree armatures. It will also add structural strength to your constructions.

It can be used as an insulation material to cut condensation, reduce sound and hold heat.

Ideal for insulation of steel hulls and cooling boxes.

Please spray a small test amount into an empty carton before getting started. It should be tack-free within 60 seconds, if not check gun is clear and working correctly, and tanks are sufficiently warm. Also take note of the colour, then while you're spraying keep a constant eye on it; if the spray lightens or darkens it could indicate a blockage in one of the tubes or nozzles. Do not continue to use as it may not set.

Please note: This is for the Froth Pak 180 tanks only, If you require a Gun/Hose assembly with your tanks please see product code: PROFP180NK