![Holding Magnet (240v AC [excl. holding plate])](/streamProductImage.aspx?&width=500&height=500&paddingColour=ffffff&ref=SOL035AC&ver=1&x=.jpg)
This is a 35mm diameter magnet which when energised releases its load. The applications are numerous; it could secure the lid to a drop box, release a light cloth, or make a picture fall from a wall.
We recommend using our 40 mm diameter holding plate (armature). A rubber grommet is supplied to allow some movement to ensure complete contact with both faces. If you want to release very light loads ensure that the voltage is accurately delivered to avoid residual magnetism. Adding extra weight or spring loading doors can be helpful design tips.
Our holding magnets are supplied with a plug and socket connector with PG11 glands ready to take your cable. Wiring information: Earth on earth, live on terminal No.1, neutral on terminal No.2.
Size: 50mm long x 35mm diameter
Fixings: One off 5 mm machine screw
Weight: 350g
Power Consumption: 8 W
Supplied with plug for 240v AC.
As these units are impulse rated they should not be energised for longer than 15 seconds - our Firing Box is fitted with a momentary switch to avoid this happening.
Please Note: If using the Firing box you will need to order a power feed cable [SOLB2A] and a length of cable [SOLCABLE] fitted with a white AMP connector [SOLAMPP]. You will need to connect the cable to the Holding magnet.
Get notified about changes to this product
including pricing updates and stock availability
by using Visual Ping: