A water based hard wearing glaze with a dead flat finish- introduced just a few years ago and already a best seller!
For extra strength for heavy duty applications apply it as a top coat over the Polyvine Heavy Duty Floor Varnish
.Dries in minutes, cures in hours.
Size: 1 L
Drying Times: Touch dry: 30-60 minute, Recoatable in 1-2 hours, Full cure after 16 hours.
Coverage 10 - 20 square metres per litre.
Note: The matting agents in this product can on rare occasions cause problems with white patches. We would strongly recommend that a test sample is undertaken in the same working conditions [including drying time of the base coat] before tackling a main floor.
As with all makes of glaze the most prevalent problem is ‘blooming’. This is nearly always caused by poor drying conditions especially when the glaze is applied late in the day and left to dry in a cold workshop overnight. The situation is worsened if the base paint has not thoroughly dried and moisture is trying to migrate out through the glaze. In many cases the bloom will gradually disappear. A gentle heat from a hair drier will normally indicate whether the glaze will recover or if the area needs re-painting.