Products
Filter Products
Your basket is empty
Remeltable PVC Compound
This material is used in similar situations to Silicone Rubber, providing a lower cost but less durable option. Remeltable PVC can be poured over a master to form a flexible mould.
Good tensile strength and flexibility will allow castings with deep undercuts to be removed from a one piece mould, without damage.
The material does not require a release agent and when the mould is worn, the product can be remelted [@ 130 - 135°C] and used again - a fully recyclable product!
We offer the product in two grades: Flexible [Neutral] and Semi Flexible [Blue]. Choose the Semi Flexible for large moulds and the Flexible for more detail.
The melting pot gives a thermostatically controlled temperature range of between 50°C and 200°C and will prevent scorching.
Be aware that the product will not reach sufficient heat to melt on a water jacket double boiler.
Good tensile strength and flexibility will allow castings with deep undercuts to be removed from a one piece mould, without damage.
The material does not require a release agent and when the mould is worn, the product can be remelted [@ 130 - 135°C] and used again - a fully recyclable product!
We offer the product in two grades: Flexible [Neutral] and Semi Flexible [Blue]. Choose the Semi Flexible for large moulds and the Flexible for more detail.
The melting pot gives a thermostatically controlled temperature range of between 50°C and 200°C and will prevent scorching.
Be aware that the product will not reach sufficient heat to melt on a water jacket double boiler.
